Fiddes & Sons Supreme Wax Polish 400ml

Fiddes & Sons Supreme Wax Polish is formulated to offer excellent results on bare or sealed wood. Order before 1pm for same day dispatch. Next day delivery to mainland UK.
Light
Forest Brown
Rugger Brown
FREE SHIPPING
LIFETIME GUARANTEE
1 TREE PLANTED FOR EVERY £50 SPENT
  • Fiddes & Sons Supreme Wax Polish is formulated to offer excellent results on bare or sealed wood. Fiddes Supreme Wax Polish contains a unique, environmentally friendly blend of waxes that naturally enhances the beauty of your wood.

    Quick drying and low aromatic

    Fiddes and Sons Surpeme Wax Polish is the wax we apply to our oak beams and shelves to protect and seal the wood after the colour stain has been applied. It's great to maintain you oak products and keep it looking its best.

     

    Please see below the colour wax we apply on top of each of our colour stains:

    Light - Light
    Antique Pine - Forest Brown
    Medium Oak - Forest Brown
    Walnut - Rugger Brown
    Jacobean - Rugger Brown
    Black - Rugger Brown
    White - Light
    Pale Grey - Light
    Grey - Light

     

    SPEC

    Coats Needed: 1 (Further coats will depend the colour / enhance sheen level

    Dry time: 3 minutes

    Coverage: 16m² per litre (depending on substrate and method of application)


    DOWNLOAD DATA SHEET

     

    PREPARATION

     

    Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax. Take care to remove all traces of sanding dust and test the chosen Fiddes Supreme Wax shade on a similar substrate to verify the colour. A coat of Fiddes Shellac Sealer is recommended on open grained woods prior to application.

     

    APPLICATION

    Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.

    Leave to dry for around 3 minutes, and buff to finish with a soft cloth.

    The application of additional coats will deepen the existing colour / shade and significantly enhance the resulting sheen level.


     

  • SPEC

    Coats Needed: 1 (Further coats will depend the colour / enhance sheen level

    Dry time: 3 minutes

    Coverage: 16m² per litre (depending on substrate and method of application)


    DOWNLOAD DATA SHEET

Follow Us On Instagram

@TRADITIONALBEAMS

You Might Also Be Interested In...

Holzöl Worktop Oil 1L - Natural Effect Clear

Holzöl Worktop Oil 1L - Natural Effect Clear

£30.00

Shop Now
Holzöl Floor Oil 2.5L - Clear 30% Sheen

Holzöl Floor Oil 2.5L - Clear 30% Sheen

£70.00

Shop Now