Rustic Oak Mantel with Corbels *Aged*
-
Rustic Oak Mantel with Corbels *Aged*
Our Rustic Oak Mantel with corbels is the perfect addition to your room and will add heaps of character. Distressed edges and textured surfaces gives the appearance of a time worn, centuries old rustic oak mantel.
Corbels are supplied with keyhole brackets machined into the back. We position the keyhole vertically hence they need to be fitted before the beam.
The corbels are approximately 140mm high x 140mm wide x 90mm deep.
Each beam is supplied with concealed shelf supports capable of supporting your beam with ease. Pre drilled holes are professionally drilled into the back of your beam to ensure a clean and crisp finish. Fixings are positioned on the smallest side of the beam so that they fit comfortably with the corbels. The fittings provided can be fitted into brick, stone or breeze block walls. They can also be fixed to stud walls where timber uprights can be located.
The fittings that come supplied are suitable for use on brick, stone, and breeze block walls. If you have a stud wall, then they can be fixed to this as long as timber uprights can be located. A set of fitting instructions come with our all of our beams. Please note: The back of the beam is left unfinished.
What you need to know!
- Lifetime Guarantee!
- Size is accurate to +/- 5mm
- Complete with fixings, pre drilled holes and fitting instructions.
- We are a trusted online retailer - see what our past customers say.
- Fireplace beams are crafted from well air dried oak to ensure minimal movement once installed.
- We recommend leaving your beam (removed from the packaging) to acclimatise to your room for 2 weeks prior to installation.
Important:
Please be aware as oak is a natural product, each piece does vary with regards to: cracks, knots, colour and grain pattern. Beams sizes are approximate to +/- 5mm. Some beams may have small areas of pin holing which further adds to the rustic effect, we will treat these beams with anti infestation solution. All of our oak beams are well air dried ensuring minimal movement once installed in your home. As your beam adjusts to your room temperature further cracks may appear only adding to the character. This is nothing to worry about. Please note that none of the above can be treated as defects.
Oak Beams are a combustible material. It is important the the beam is positioned a safe distance away from stoves, flues and other heat sources in line with building and HETAS regulations. Installing a beam to close to a heat source may cause excessive cracking and be unsafe.
-
-
Everything we manufacturer is professionally finished in-house using only the finest products. We achieve this fantastic range with wood stains which penetrate deep into the wood followed by a top coat of wax polish for protection.
Unfortunately, we cannot guarantee exact colour matches to existing furniture. Please use these colour samples as a guide only, as oak is a natural product colour variation can be expected.
The following swatch provides a great example of how unfinished oak can vary in colour.
-
Check out our installation guides below… Please note, all installations are different and we can only offer a general guide.
7.5″x5.5″ beams do not come with fixings.
12mm Concealed BracketsSupplied with oak fireplace beams and shelves 11cm (4.25") deep and above. Keyhole FixingsSupplied with corbels and all oak fireplace beams 9cm (3.5″) deep or less. Heavy Duty Threaded RodsRecommended fixing method for 19cm x 14cm (7.5″x5.5″) beams. Plasterboard FixingsSupplied with our shelves suitable for fitting to plasterboard walls. Steel Bracket FixingsSupplied with steel bracket pine shelves.
Please Note:
We cannot take any responsibility for any incorrect installations or damage caused during the installation process. Returns are not accepted for items that have been installed.