A blend of urethane, natural oils and hybrid resins designed to achieve a tough floor finish and enhance grain definition on all types of solid and engineered floors.
Water and dirt repellent, soft to the touch yet extremely durable. Suitable for all domestic and commercial floors.
Supplied ready for use but can be thinned up to 15% by volume with the recommended thinner, R047, if required.
SPEC
Number of coats needed: 2-3 coats
Coverage: 12 - 28m² per litre dependent upon the application method, absorbency and surface quality of the timber being coated.
Time between coats: 3-4 hours
Drying Time: 3-4 hours
Size: 2.5L
Brand: Holzöl
HOW TO USE
1. The surfaces of the timber to be coated should be clean, dry and free from oils, greases, waxes, silicones, old finishes etc.
2. Apply Holzöl Floor-Oil with a short mohair roller/T-Bar or oil brush at 80 mls/m2.
3. Allow to dry for 3 - 4 hours.
4. Lightly abrade with a red Scotchbrite pad (or equivalent) on a rotary buffer.
5. Apply a second coat of Holzöl Floor-Oil and allow 3 – 4 hours to dry.
Apply further coats as required, ensuring light abrading between coats to aid adhesion and improve the finish. A natural finish can be readily achieved with 2 – 3 coats of the Holzöl Floor-Oil.
MAINTENANCE
The use of good quality entrance mats and furniture pads are recommended to avoid damage to the finish.
Surfaces should be swept or vacuumed regularly to avoid dust and grit build up as this would be abrasive to the surface and before routine maintenance. Pets can also traffic grit and dirt on to a floor. Pets claws should trimmed regularly to reduce scratches/indentation to the finish.
The finish should be left for a minimum of 14 days before “wet cleaning”.
To re-vitalise the appearance of flooring damaged by scratch and scuff marks, first ensure the floor is cleaned and buffed dry then Holzöl Floor-Oil can be applied by pad across the surface, this can be buffed with an oil cloth.
SPECIFICATION
Number of coats needed: 2-3
Coverage: 12 - 28m² per litre dependent upon the application method, absorbency and surface quality of the timber being coated.
Drying Time: 3-4 hours
Time between coats: 3-4 hours
Size: 2.5L
Brand: Holzöl
How to Use:
1. The surfaces of the timber to be coated should be clean, dry and free from oils, greases, waxes, silicones, old finishes etc.
2. Apply Holzöl Floor-Oil with a short mohair roller/T-Bar or oil brush at 80 mls/m2.
3. Allow to dry for 3 - 4 hours.
4. Lightly abrade with a red Scotchbrite pad (or equivalent) on a rotary buffer.
5. Apply a second coat of Holzöl Floor-Oil and allow 3 – 4 hours to dry.
Apply further coats as required, ensuring light abrading between coats to aid adhesion and improve the finish. A natural finish can be readily achieved with 2 – 3 coats of the Holzöl Floor-Oil.
Maintenance
The use of good quality entrance mats and furniture pads are recommended to avoid damage to the finish
Surfaces should be swept or vacuumed regularly to avoid dust and grit build up as this would be abrasive to the surface and before routine maintenance. Pets can also traffic grit and dirt on to a floor. Pets claws should trimmed regularly to reduce scratches/indentation to the finish.
The finish should be left for a minimum of 14 days before “wet cleaning”.
To re-vitalise the appearance of flooring damaged by scratch and scuff marks, first ensure the floor is cleaned and buffed dry then Holzöl Floor-Oil can be applied by pad across the surface, this can be buffed with an oil cloth.
